Changing the functions of this thing is something which you need to do with extreme caution. If not, you can damage the radio as well and you cannot get a replacement for that. This is why it is important that for you to familiarize with the process and stick with it even if you have always wanted to explore.
You should not paint this item just for fun. A military CB antenna is meant to look professional since your superiors are bound to check it. Thus, stick with what your colleagues have done and you can even ask for their help if you are really having difficulty dealing with yours.
Do not exert too much effort on the base. It has to maintain the right level of tightness before you opened it up. Yes, you can be a little bit of short with that level but your main concern is not to let the base collapse. So, make measured twists and stop when one is already having doubts with what you are doing.
Open the bottom part with the use of common tools. However, never use a knife since that can make the lid open more which can pave way to air. If you have a screwdriver, that shall be enough and the next thing that you need to focus on is the location of the main cable. Read the label for you not to have mistakes.
Find capacitor number five and twist it. However, be certain that you have moved to the right while you were counting. That can bring accuracy to your work which is necessary in keeping all the frequencies open for your daily. Without proper communication, you can easily misinterpret the orders being given to you.
Have the right length of cable to connect the antenna and the CB. Do not skim on this one so that you would not go to the store once again. Moreover, wear protective glove since this is the part where in a fitting task would be done. That involved heat with some of the parts and you really have to protect yourself.
Do not leave your station if there is still a gap between the cable and its respective destination. Mounting this thing is important too. Do not mix metal materials in one platform since that can really disrupt the reception that you shall be receiving. This can result to an accident that your headquarters will know nothing about. You might not get back in one piece.
Let a SWR meter be the judge of the progress which you have made. If you did not meet the work, you possess no choice but to retrace your steps. However, be aware of your exact mistake for you to get it right for the second time.
The lid at the bottom must be tightly closed after the modification. Air can be very harmful for wires. Thus, check the screws once again and do not hesitate to tape it up if you are confident that you already got everything right for the nth time.
You should not paint this item just for fun. A military CB antenna is meant to look professional since your superiors are bound to check it. Thus, stick with what your colleagues have done and you can even ask for their help if you are really having difficulty dealing with yours.
Do not exert too much effort on the base. It has to maintain the right level of tightness before you opened it up. Yes, you can be a little bit of short with that level but your main concern is not to let the base collapse. So, make measured twists and stop when one is already having doubts with what you are doing.
Open the bottom part with the use of common tools. However, never use a knife since that can make the lid open more which can pave way to air. If you have a screwdriver, that shall be enough and the next thing that you need to focus on is the location of the main cable. Read the label for you not to have mistakes.
Find capacitor number five and twist it. However, be certain that you have moved to the right while you were counting. That can bring accuracy to your work which is necessary in keeping all the frequencies open for your daily. Without proper communication, you can easily misinterpret the orders being given to you.
Have the right length of cable to connect the antenna and the CB. Do not skim on this one so that you would not go to the store once again. Moreover, wear protective glove since this is the part where in a fitting task would be done. That involved heat with some of the parts and you really have to protect yourself.
Do not leave your station if there is still a gap between the cable and its respective destination. Mounting this thing is important too. Do not mix metal materials in one platform since that can really disrupt the reception that you shall be receiving. This can result to an accident that your headquarters will know nothing about. You might not get back in one piece.
Let a SWR meter be the judge of the progress which you have made. If you did not meet the work, you possess no choice but to retrace your steps. However, be aware of your exact mistake for you to get it right for the second time.
The lid at the bottom must be tightly closed after the modification. Air can be very harmful for wires. Thus, check the screws once again and do not hesitate to tape it up if you are confident that you already got everything right for the nth time.
About the Author:
You can visit www.hascall-denke.com for more helpful information about Modifying A Military CB Antenna.
No comments:
Post a Comment